2 Hour Fire Rated
Integrity fire rated up-to 1070x650mm
EziFit Hinge
Goodbye piano hinge, hello EziFit! Unpin the 'L' at the top and bottom and click into place
Ideal for Block-walls
Designed to be surface mounted on to a structural membrane of a block-wall system
Fitting Instructions
- Ensure the opening is at least 5mm larger than the meter box
- Open the door, pull the 'L' latch to release the EziFit Hinge System and to lift out the door
- Place the frame into the aperture. Mark the position of the hinge and door retaining pins located towards the hinge side
- Remove the frame and drill clearance holes for spring pin hinge and door retaining pins using an 8mm drill bit
- Apply 5mm bead of mastic to the back edge of the frame
- Fit the door by placing the lower spring pin hinge into its location. Slide the top pin along the inside frame until the hinge locates fully
- If necessary, apply 5mm intumescent acrylic mastic to the rear of the frame to support the construction
- Lock the door in place with the provided key. Ensure the door is flush when closed.